Two Block Paved Driveways in Sellindge, Kent
Preparation Summary:
Dug out and removed the area, Graded off the surface, Redesigned the layout of the area, Supplied and installed MOT Type 1 foundation, Supplied and installed membrane sheeting, Installed new kerbing set in concretePaving Installation
Supplied and installed a sand / grit base for laying paving, Installed paving on top of the sand, Laid the paving in a °90 degree herringbone pattern, The paving used was block paving, All open edges of paving set in concrete, Machine vibrated and compacted the paving
Main Colour: Charcoal
Border Colour: Natural
This was a block paving project that JD Drivestyle LTD recently finished in Sellindge Kent. We tackled two adjoined driveways and paved them in a matching style.
First, we removed the broken concrete panels and prepared the driveway for a new foundation. We put down a type 1 MOT stone base, compacted it, and topped it with heavy-duty protective membrane sheeting. To prevent water pooling on the driveway, we installed new ACO drains. We also laid brick-on-edge around the driveway and flat top kerbing across the front. All of these elements were firmly set in concrete. The main paving was laid in a traditional 90° pattern, using 'charcoal' and 'natural grey' paving blocks.
Visit our website for more information about what kind of block paving services in Kent JD Drivestyle LTD offers. If you want to jump straight into your project planning, call us today at 01892 322 038.
