Driveway with Charcoal Block Paving and Gravel in Whitstable
Preparation Summary:
Dug out and removed the area, Graded off the surface, Redesigned the layout of the area, Supplied and installed MOT Type 1 foundation, Supplied and installed membrane sheetingPaving Installation
Supplied and installed a sand / grit base for laying paving, Installed paving on top of the sand, Laid the paving in °45 degree herringbone pattern, The paving used was block paving, All open edges of paving set in concrete, Machine vibrated and compacted the paving
Main Colour: Charcoal
Border Colour: Natural
Gravel Installation
A new block paving border around the area set in concrete, Laid-in membrane weed block, Installed a new gravel stone surface over the area, The gravel stone was 24mm aggregate
Gravel Colour: Silver
Take a look at this driveway project in Whitstable, carried out by JD Drivestyle LTD.
We started by taking out the original lawn and concrete panels. Our team installed a new foundation of an 804 stone base and compacted it down. We also put down heavy-duty membrane sheeting to prevent unwanted weed growth. The driveway is divided into two parts, a block paving one leading from the road straight into the garage and a gravel one with a pathway leading towards the back patio, which was also completed by our team. We installed a new flat top kerbing all around and brick on edge kerbing for a little grassy area on one side and set them in concrete. Our team used Marshall's paving blocks in 'charcoal' for the main paving and 'natural grey' for the border. We used the same style for a little pathway leading along the house. We filled the remaining area with gravel chippings.
Click here to see other block paving services in Kent, or make a first step towards a new, beautiful driveway and give JD Drivestyle LTD a call today.
